Laminated apron for kitchen

The kitchen is one of the most functional rooms in the house. People try to approach arrangement of this room with all responsibility. After all, the room should be not only beautiful and modern, but also the most functional. One of the most important elements of the room is a kitchen apron - this surface plays a protective role. Thanks to his presence, the walls do not get dirty while cooking.

9 a photo

Criterias of choice

Before you start creating a kitchen apron, you need to study in detail the basic requirements that professionals often place on such elements. If you decide to do the arrangement of the protective surface yourself, pay attention to the following points:

  1. apron size. You can calculate the parameters yourself by completing the pre-necessary measurements. Basically, the coating is mounted so that it slightly goes beyond the worktop area. Most often, the height of the apron does not exceed the mark of 85 cm.The choice of width depends on the location of the furniture;
  2. operational period. To create a kitchen apron is best to choose durable and reliable materials that are not afraid of exposure to moisture and temperature extremes. From these qualities depends directly on how long the protective coating will last you;
  3. practicality. The surfaces are settled near the sink and the stove, and therefore the aprons are quickly contaminated. It is necessary to give preference to materials that are easy to clean and do not deform under the influence of household appliances.

It should be noted that recently in the creation of modern kitchens quite often used laminate instead of an apron. This is due to not only the attractive appearance of the material, but also excellent performance. The surface of the laminate is easy to clean, not afraid of temperature extremes and moisture.

Advantages and disadvantages

Most people are accustomed to using laminate flooring. But recently, modern interior designers are increasingly using this material for wall decoration and designation of functional areas in the room.

The apron from a laminate for kitchen well protects a wall from various pollution, possesses the high level of water resistance and does not differ in difficult process of installation. For cleaning the surface, you can use various chemicals. Even after regular washing, the apron does not lose its properties and appearance.

Another advantage of this option is the low cost compared to other materials.

It is worth noting that if you want to equip a laminated apron in the kitchen, it is best to use panels 31 and 32 class. These species are excellent in resisting moisture, they are not afraid of intense load, which is important in the process of operation.

As for the minuses, a significant disadvantage can be attributed to poor resistance to sudden temperature changes. The material is not recommended for installation for a gas or electric stove, because after a while it is able to deform. The distance between the apron and the equipment must be at least 10 cm.

In the process of installation, all seams are treated with special glue. This is done to ensure that water does not fall into the holes between the wall and the apron of laminate.

Preparatory stages

You can install the laminated apron yourself. First you need to prepare the material and tools for work. In the process, the master will need a jigsaw, building level, screwdriver, expansion wings and a soft spatula. Pencil, ruler and scotch tape are used as accessories. For work also need a hammer.

Before you equip the apron of laminate, you need to carefully prepare the surface. The whole process begins with the alignment of the wall. To do this, use a standard putty. It is worth noting that the composition helps to eliminate all defects and irregularities on the surface. After applying the putty, you need to start creating crates. For this you can use small wooden bars.

It is necessary to fix all the elements for the batten so that the distance between them is not less than 30 cm from each other. As a basis for laminate used screed made of concrete or linoleum. During the creation of the crates you need to take care that the design is strong and as smooth as possible. You can check the basis for deviations using the construction level.

When using laminate as an apron, specialists often create an additional waterproofing layer. You can make it with a film of polyethylene. Its edges should go beyond the material not less than 5 cm.

Basic installation methods

The laminate apron can be created in two main ways: locking and gluing. The first option is simple, the process does not take much time. On laminated panels there are special spikes and grooves, which greatly simplifies installation.

Installation of the first order should always start from the top corner. The spike should be near the surface. During installation, the laminate sheet rests on the batten. The second panel is pressed at an angle of 45 degrees. Attach the sheet to the end slot of the first part.

After that, the laminate is fixed on the crate with screws. Similarly, you need to perform the installation of the second row. To create an apron in this way does not need a large amount of material. Fastening between the rows using a longitudinal lock.

Sometimes there is a need for a neat fit of the panels to each other.In this case, you need to use a wooden bar and a hammer.

The second method of fixing the laminate - glue. This option is considered more economical compared to the previous method, but it will take much longer to complete. The main advantage of this method is that it fits all walls.

To begin with, laminate must be bonded to each other, using special adhesives for this purpose. After that, the substance must be applied with a thick layer on the end edge and the groove of the material. Then you need to carefully install the spike of the next panel. The remains of the adhesive composition must be immediately removed with a damp cloth. This should be done quickly so that the substance does not dry out on the material.

Installation of the second row is carried out in a similar way. If during joining you notice that gaps have formed at the joints, you need to treat them with a sealant. The grout is applied with a soft spatula.

Basically, after installing the second row, the process is stopped for several hours. During this period, the glue hardens, which greatly facilitates the further installation process.

Tips and tricks

Reading the reviews, you can make sure that the material is durable and resistant. Aprons made from laminate look pretty stylish and modern. Surfaces fit perfectly in both classic and modern interiors. The advantage of the laminate is that it is easy to clean.

Comment author



Living room